Spring Couplers
Modeled after the A.A.R. Standard 'E' Coupler
| FEATURING: |
Two coil springs for damping action in both directions. Conveniently fits into standard 1" x 2" x 1/8" rectangular tubing. User friendly operation with lower release brass catch. Can be altered for top release. Catch & knuckle hindge pin are brass to minimize rust. Cast in sand for a realistic look. |
| SCALE: | 1.5 inches equals one foot. |
| MATERIAL: | ductile iron. |
| WEIGHT: | 2 pounds each. |
| DIMENSIONS: |
shank: 3/4" H x 1 3/8" W overall length: 7" height: 2 1/8" width: 2 1/4" typically uses 3/8" bolt with ni-lock nut for mounting. springs: 5/8" diameter by 1 3/4" long. |